ForNAV Tips Part 5: How to Use Custom Report Layouts to Update Business Central Reports

June 4, 2021 Justin Arnold

This is the fifth of a six-part series discussing how businesses using Microsoft Dynamics 365 Business Central can analyze their financial health by leveraging ForNav tools to streamline reporting processes for generating key performance indicators. In this article, we discuss how to use the ForNAV Designer to make minor adjustments to the layouts of converted reports in Business Central. 

 

The ForNAV Designer is a very powerful tool with tons of options, settings, and features with which you can create simple and complex reports. I could easily write a 10-part series dealing strictly with the ForNAV Designer (and I may do that in the future). But for now, I will take a high-level view and simply demonstrate how you can use the tool to make simple adjustments to your converted reports.

Let’s get started!

 

How Custom Report Layouts Feature Delivers Final Solutions Quickly and Efficiently

As has always been the case, there are two ways to access and use the ForNAV Designer:

  1. Via Custom Report Layouts in Business Central
  2. Directly from the ForNAV Designer

In versions prior to Business Central, I almost always recommended making layout adjustments through the designer tool directly. In Business Central, however, you now have to take into account the AL extension model, which adds a tricky middle layer to the equation. 

Because of this, it is no longer quicker and more efficient to work directly through the designer tool. While there certainly is a place for working directly through the ForNAV Designer—and I will explain that shortly—you get the most bang for your buck by working through Custom Report Layouts. 

Consider the difference from an efficiency angle: Suppose your converted report looks almost perfect. But as a result of the conversion, a few controls were misplaced and overlap each other. Further, as can happen on a lot of reports, the margins are off just a bit, and the report hangs disproportionately to the left side of the page. 

To fix this using the ForNAV Designer, you would have to take the following steps:

  1. Open the report via the designer
  2. Make your adjustments
  3. Package your extension (which includes your new layout changes) in VS Code
  4. Uninstall (and optionally unpublish) the previous version of your extension
  5. Install the new extension (and then wait…wait…wait…until it completes its installation procedures)
  6. Reopen the web client
  7. Test your report changes
  8. If something is still off (preview from VS Code is not available), you must repeat these steps again

 

As opposed to making your changes directly through Custom Report Layouts:

  1. Go to [ForNAV] then [My Reports]
  2. Select your report and hit [Design]
  3. Make your adjustments
  4. Run the report and test
  5. Repeat if necessary

The adjustment you make in step three above will create a custom report layout that supersedes the original layout uploaded earlier. The original layout will never go away—it just enters an archived state.

As you can see, there is a lot less fuss working directly through the built-in ForNAV Custom Report Layouts feature. As with anything in life, particularly for consultants working on an hourly billable schedule, time is of the essence. So unless it’s absolutely necessary (and I assure you, there will be times it is), I generally recommend working through Custom Report Layouts as you will arrive at your final solution quicker and more efficiently than working directly through the designer tool itself.

 

Using ForNAV Designer Via Custom Report Layouts in Business Central

Let’s start the process of using ForNAV Designer via Custom Report Layouts by first running your converted report again:

Screenshot of Custom Converted Report ForNAV

 

 

Since our last article, I went ahead and imported a company logo as shown in the image above so the sample report has a little more flair. The converted report has skewed everything to the left quite a bit.  This is very typical of converted reports and will need to be addressed.

Let’s also suppose a few other cosmetic changes are needed:

  1. Bolding the header field title font
  2. Removing the blank line between header fields
  3. Removing [Unit of Measure] from the sales lines section

 

To make these changes, open the Business Central web client and navigate to [ForNAV] then [My Reports]. Highlight the converted Sales Order report and hit [Report] then [Design]. Finally, click on the [fornavdesign] link that appears at the bottom-left corner of the page. This opens the ForNAV Designer from directly within Business Central:

 

Screenshot of Business Central Web client opening Sales Order Report

 

Welcome to the ForNAV Designer!

Screenshot of ForNAV Designer

 

As previously mentioned, the designer tool is complex, and there are a lot of things we can do here. I will steer away from those details for now and focus on the simple changes to make. My objective today is merely to familiarize you with the tool, not to teach you to become an expert overnight!

Let’s start by addressing the left-margin issue: 

Screenshot of Sales Order in For NAV Designer

 

If you look closely, you can see there is absolutely no room on the left side of the report. This is part of the reason why the logo is cut off. If you print this to paper, you might also find [Item No.] in the line section is also cut off. To remedy this, drag the left margin indicator over to the right a bit:

Screenshot of Sales Order in For NAV designer highlighting extra margin space

 

Screenshot of Sales Order in For NAV designer highlighting extra margin space

 

I dragged my margin over a little less than half an inch. You can drag it over more or less, depending on what looks right to you. You may have also noticed the company logo looks like it overlaps on the printed report. This too is fairly common in converted reports. 

To fix, simply adjust the sizing property for that control by clicking the logo control in the upper left-hand corner of the report designer. Then go to the properties window on the right side of the screen and change the [Sizing] property to [Squeeze]. This forces the image to fit within the control on the report, regardless of the size of the image:

Screenshot of Sales Order in For NAV designer adjusting overlap

 

You probably notice there are actually three logo controls on the report—[left justified], [center justified], and [right justified]. There is a property in the [Sales & Receivables] set-up called [Logo Position on Documents] that determines which of these controls is used when the report is printed. 

Currently, this database is set up to print [left justified] controls. To be thorough, adjust the sizing property of all three controls. So if the [Logo Position on Documents] field is changed, the report will not display a skewed logo:

Screenshot of Sales Order in ForNAV Sales and Receivables Setup

 

To see how you did, hit [Save] in the toolbar and close the designer tool. Now run the report again:

Screenshot of ForNAV Report

Much better!

Now, you are no longer cutting off on the left, and the logo prints properly. Let’s make the last few adjustments by going back into the report designer:

Screenshot of Sales Order in ForNAV designer Headers

 

First, use the bold font for some of the header fields. This will affect the following controls:

  1. TaxRegLabel
  2. Ship Via
  3. Ship Date
  4. Terms
  5. Customer ID
  6. P.O. Number
  7. P.O. Date
  8. SalesPerson

 

Bolding a field is as simple as clicking on the control and hitting [Ctrl] + [b], or hitting the [B] in the toolbar. 

Next, remove the blank lines between [Ship Date] and [Terms] and between [P.O. Date] and [SalesPerson]. To make these changes, just click and drag the controls directly below and move them up so there is no longer a blank space. Super easy!

Finally, get rid of [Unit of Measure] in the line section by clicking the [Unit] control under the [Header2] section and hitting [delete]. Next, move down into the [Body4] section and delete the data control. 

Once you are done, drag the [Description] control over to the right a little bit to fill in the blank space.  Upon completion, you should have something that looks like this:

Screenshot of Sales Order in ForNAV

 

Save the report and re-run it:

Screenshot of ForNAV Report

Looks good!

To wrap this up, let’s go to [Layout] then [Custom Layouts]:

Screenshot of Custom Layouts in NAV designer

 

You now have two separate layouts for this report. The first, [Built-in Layout], was uploaded with your original extension and is the base layout for your converted report. The second, [ForNAV BC custom layout], is your modified layout and is based on the Business Central built-in Custom Report Layouts feature. 

Any changes you make going forward will be attributed to your custom layout. If you decide to revert to the original layout, you can either hit the [Activate] checkbox on the [Built-in Layout], or you can permanently delete your custom layout by hitting the [delete] button:

 

Screenshot of Report Layout in ForNAV

 

Modifying Reports with ForNAV Designer

Now that you have seen how to modify layouts directly from within Business Central using the Custom Report Layouts feature, let’s briefly talk about modifying reports using the ForNAV Designer.

First, why would you ever use the designer if you can so easily work with Custom Report Layouts? The main reason is the addition of logical changes and data controls to the report. Unfortunately, with Custom Report Layouts, you are limited in terms of what you can add to a report. If you need to add variables and then display those variables as values on the report, you must do so directly in the ForNAV Designer. You cannot do this from within Business Central using Custom Report Layouts. 

Second, sometimes it just makes more sense to permanently update a report versus making changes using Custom Report Layouts. Regardless of the specific reason, there are times and places where you simply must use ForNAV Designer to make certain report adjustments. 

We will go into the process a bit more in our next article—How to Use ForNAV Designer to Update Converted Business Central Reports. You will see what the process looks like, what is required, and what your end-results might be.

For now, I hope this information in this article helpful. And if you have any questions about Business Central or ForNAV, feel free to reach out to me at info@westerncomputer.com.

 

 

About the Author

Justin Arnold

With a focus on the technical and functional aspects of Dynamics 365 Business Central, Justin Arnold has worked for Western Computer since 2016.

More Content by Justin Arnold
Previous Video
The EDI Solution that Scales for Your Business with SPS Commerce
The EDI Solution that Scales for Your Business with SPS Commerce

Learn about the EDI solution that scales for your business with SPS Commerce. Watch our OnDemand webinar to...

Next Article
Planning Your Migration from Dynamics AX to the Cloud
Planning Your Migration from Dynamics AX to the Cloud

Learn about the benefits of migrating from Dynamics AX to the Cloud for data synchronization, accelerated c...